A hot tub is a great way to relax during winter. But during summer? It takes up much of the space in your household. Whether you want to change your hot tub for a new one or remove it entirely, removing an installed one is not as easy as it seems. Hot Tub Removal in Santa Ana, Junk Mission is with you!
Hiring a hot tub removal in Santa Ana is done by experts. If it is still reusable, the hot tub is removed with care, so others can still reuse it. For a defective hot tub, its parts are removed and recycled. It can be dangerous to remove it yourself since there is exposed wiring, which only licensed experts at Junk Mission can do.
What to Consider Before Removal
Hot tub removal is a complicated process. What comes to a homeowner’s mind is just to use a saw and chop it into pieces to have it removed and brought to a facility. But before you do that, here are the things you might want to consider.
Can It Still Be Used?
A hot tub set contains a user manual that has the troubleshooting section in it. You can reread it to know if the hot tub can still be fixed. Some of the tools and equipment needed are basic and most likely present in your home.
If you just want to remove it because you want to use the space, call an expert to do it for you.
There are Reusable Parts
Don’t cut it up yet. Though your hot tub is already damaged, some parts can still be repurposed. Hot tubs are built to last for a long time. If it does not work anymore, there might be only a couple of parts broken.
If you are hiring a service, inform them of the broken parts so they can sort out which parts can still be used. Some of these parts can be installed on a different appliance or equipment.
It Has Water Pipes and Electrical Wires
As we all know, water and electricity don’t go well together. It can be dangerous if you detach the hot tub on your own. A mistake can get you electrocuted or affect your entire water line at home, which will cost you more in hospital bills and fixing.
Safety Precautions
Before you remove a hot tub, it should be disconnected from the electricity of the gas line. It has many electrical components that can harm you if you are doing the removal on your own. The water in your hot tub should also be drained, ensuring it is dry before dismantling. Start with the external parts before you remove the internal parts.
Specific tools and equipment should be used since the hot tub skirt has many screws attached. You also need a suitable pair of gloves while doing the removal. The hot tub bed is usually made of sturdy material and may have sharp edges if you decide to chop off the material.
Use safety goggles and an electric saw to chop off the hot tub bed. Never use a hammer since it can leave small debris on your property, which can also be dangerous for your family members.
Steps in Hot Tub Removal Process
The removal is as challenging as the installation. It may take a lot of time and effort to remove the hot tub efficiently.
Gather The Tools and Equipment Needed
Prepare all the things you need before starting the removal. Make sure you have all the safety equipment as well. Your gloves and safety goggles should always be worn when doing the job. As for the tools, place them near your hot tub area so you won’t be going around your house to get the tools one at a time.
Disconnect the Hot Tub From the Electrical and Water Lines
Aside from turning off the electrical supply of the hot tub, you need to drain it and ensure that its internal parts are also dry. You wouldn’t want to work with water flowing from the hot tub since it can be messy and dangerous.
Disconnect the heater and filtration units after disconnecting them from the electrical and water lines. There are special wirings and water lines attached. If you are unsure where these are, call a company that offers hot tub removal in Santa Ana.
Dismantle The Hot Tub Skirt
You need to remove the external parts before removing the spa skirt. Usually, these side panels are made of wood, and you must use a screwdriver to do this process. If your hot tub skirt is whole, remove the screws from the corners before removing the entire material.
Using a crowbar to remove the side panels forcefully is not recommended. It can damage the side panels, especially if made from a brittle material.
Remove The Salvageable Internal Parts
If you can, dismantle the internal parts of the hot tub. Remove the motor or pump first, then continue with the other electrical parts. Some reusable parts include nozzles and small parts, so ensure that these are carefully removed.
Cut The Hot Tub into Sections
You can use an electric saw to do this. Cutting the hot tub will make it easier to be removed it from the area. You can start anywhere in the tub as long as it is cut vertically. Ensure that the size of each section is manageable for you to bring out.
If you prefer, you may also remove the insulating foams first before cutting the hot tub.
Haul The Hot Tub Debris
You can call a removal company to do this if you have no idea where to dump the debris. But you can also load and haul them to a dumpster. Make sure that the debris in your truck is covered to ensure that there will be no debris falling when you transport them to the dumpster.
For reusable electrical parts, you can bring them to a recycling plant.
Special Equipment Needed
The hot tub is a household fixture, so you must prepare special tools and equipment before fully removing it from your property. Here are the things you may need:
- Safety goggles and thick working gloves
- Wire cutters
- Sawzall or reciprocating saw
- Screwdrivers
- Wheelbarrow (for hauling)
- Large cover (for transporting)
Hiring a Professional Service
Removing a hot tub from your property is challenging, from dismantling the parts to hauling its debris. It may take days before you can fully remove it, especially if you have other tasks to do at home. You may hire people for help, but it costs a lot. The hauling process adds up another cost for fuel. You also need to pay a dumpster fee.
Suppose you are a busy individual who works or runs a business. You need to spend time removing the hot tub instead of earning money. Fortunately, you can hire a company that specializes in hot tub removal in Santa Ana.
Junk Mission is only a phone call away. You can set your most convenient schedule to get your hot tub removed. In addition, the hot tub removal company has the appropriate tools and equipment to do the job safely and efficiently. No need to worry about dismantling, loading, and transporting the hot tub to a dumpster or a recycling company.
When you hire a professional service, you don’t need to block your work or business schedule. The hot tub is removed when you get home from work or business. You wouldn’t notice that a hot tub was previously installed in the area. All the debris will also be cleaned and hauled from your property. The experts are also insured and licensed, so you don’t have to worry about additional expenses for damages or accidents.
In addition, Junk Mission also offers different kinds of removal and hauling services in Santa Ana. If you need furniture or appliance removal, shed removal, or light demolition, Junk Mission can do the tasks for you at an affordable rate.
Conclusion
The weather in Santa Ana during summer can be scorching. No wonder many homeowners remove their hot tubs since it takes up space on their properties. However, doing the DIY task is difficult and may need special tools and equipment–some households have only the basic ones.
If you’re looking for hot tub removal in Santa Ana, you can quickly request a quote from Junk Mission. You only need to complete the project details; an affordable quote will be sent to you the same day. Junk Mission also can do different removal and hauling projects that you may need for both residential and commercial.